Locky-BT is RFID access terminal designed to work as control terminal in access control systems. The device works with 125kHz, EM4102 compatible, tags.
Locky-BT utilizes main parts of access control system – reading antenna, microprocessor and output relay. It can be managed either by computeror by specialized devices – PLC, microcontroller system etc. The ID number of every approached tag is send trough asynchronous serial interface. Like answer, master device can send command for relay activation. Every communication packet has CRC byte for data validation.
RFID access terminal Locky-BT has two hardware versions for different supply voltage. Standard Locky-BT works from 8 to 15VDC, while Locky-BT-40 has extended supply voltage range from 8 to 40VDC. All other technical details for both versions are the same.
- Compact design for easy installation;
- PC or PLC control over asynchronous interface;
- Low power consumption;
- Support of LockyMonitor2 software over the asynchronous interface.
- Time attendance systems;
- Custom software access control systems ;
- Inventory management;
- Material tracking.
|Supply voltage for Locky-BT||8-15VDC|
|Supply voltage for Locky-BT-40||8-40VDC|
|Maximum consumption /with activated relay/||180mA @ 12VDC|
|Maximum switchable voltage/current||60V / 0.3A|
|Dimmensions||Ø 38mm x 36mm|
|Operating temperature||from -10 to +40 С°|
|Reading distance||at least 3cm|
|RFID tags||125kHz, EM4102 compatible|
|Non volatile memory||for up to 500 tags|
|Locky-BT – user manual (pdf, 229KB)|
|Locky-Bx_v4.02 – update file (cod, 18KB)|
|LockyMonitor2 – installation package (msi, 1.58MB)||20.01.2017|
|LockyMonitor2 – user manual (pdf, 121KB)|
|MS .NetFramework v3.5 – full installation (dotnetfx35.exe) (exe, 242.7MB)|
|MS .NetFramework v3.5 – on-line installation (dotnetfx35setup.exe) (exe, 2.86MB)|
|USB drivers for Cable converter USB/TTL (exe, 1.74MB)|