TCW121B - IP monitoring and control

Short Description

    TCW121B is a multifunctional device for remote monitoring and management. It is an Ethernet based controller, which is designed to work in IP-based networks and managed by WEB interface or SNMP programs. The controller can be used as standalone device or as a part of control and monitoring systems.

    The device utilizes special schematic which support long 1-Wire interface. The both relays can be activated not only manual but also from status of monitored parameters - temperature, humidity, analog voltage and status of digital inputs. For every parameter can be sent e-mail and/or SNMP trap if it goes outside of previously set-up range.

Features

• 10 Mbit Ethernet connectivity;
• Password protected web based configuration and control;
• 2 digital inputs with "logic level" and "dry contact" modes;
• 2 analog inputs with switchable range - 0÷5VDC or 0÷100VDC, hardware switchable;
• 2 relay outputs with NO and NC contacts;
• Long 1-Wire communication interface, which support up to 2 temperature sensors TST1XX or up to 2 temperature/humidity sensors TSH2xx;
• Temperature and humidity monitoring and control;
• SNMP v.1, SMTP, VLAN support;
• Firmware version with XML support;
• Sending SNMP Traps messages under certain conditions;
• Sending E-mail messages under certain conditions;
• MAC Address filtering;
• Remote FTP firmware update.

Typical applications

    The device's I/O interface - relay outputs, 1-Wire communication interface, analog and digital inputs and the big numbers of setup combinations make the controller suitable for solving problems in various fields such as:

• Remote control of electric devices;
• IP monitoring of electric and non-electric parameters;
• Home and office alarm systems;
• Industrial process automation;
• Environmental IP monitoring for homes, offices, server rooms etc;
• Control and management of large networks.