TCW120B - IP monitoring and control

Short Description

   TCW120B is a multifunctional device for remote monitoring and control. It is an Ethernet based controller, which is designed to work in IP-based networks.
   TCW120B can be used as stand-alone device - in this case it can be managed by browser or SNMP program. The controller can also be a part of large control and monitoring systems.
   The device supports a ping watchdog, both on ICMP requests and echoes. This is useful for units that are difficult to physically access. In case of loosing ICMP requests/echoes for more than previous set time, managed device will be restarted.

Features

• 10 Mbit Ethernet connectivity;
• Password protected web based configuration and control;
• 2 digital inputs with "logic level" and "dry contact" modes;
• 2 analog inputs with 0÷20VDC and 0÷100VDC ranges;
• 2 relay outputs with NO and NC contacts;
• 1-Wire temperature monitoring, with temperature sensors TST1XX;
• SNMP v.1, SMTP, ICMP and VLAN support;
• Sending SNMP Traps messages under certain conditions;
• Sending E-mail messages under certain conditions;
• SMTP with authorization (SSL is not supported);
• Relay activation on ping/echo timeout;
• MAC Address filtering;
• Remote FTP firmware update.

Typical applications

    The device's I/O interface - relay outputs, 1-Wire communication interface, analog and digital inputs and the big numbers of setup combinations make the controller suitable for solving problems in various fields such as:

• Remote control of electric devices;
• IP monitoring of electric and non-electric parameters;
• Home and office alarm systems;
• Industrial process automation;
• Environmental IP monitoring for homes, offices, server rooms etc;
• Control and management of large networks.