| TSH203 digital temperature and humidity sensor |
07 May 2012 |
|
| |
 TSH203 is new digital temperature and humidity sensor. It is based on SHTXX, Sensirion’s family of surface mountable relative humidity and temperature element. TSH203 is successor and will replace TSH201.
TSH203 integrate sensing element and signal processor. This combination provides a fully calibrated digital output and compatibility with 1-Wire interface. Used sensing element guaranties high precision and excellent long term stability. The device utilizes special schematic for long 1-Wire support.
TSH203 is designed for 19" cabinet mounting and can be used for single or multi-sensor systems for environmental monitoring in server rooms. At the moment this combined sensor is supported by TCW111, TCW121 and TCW121B.
|
|
| TCW121B - Ethernet controller for IP monitoring and management |
20 Sep 2011 |
|
| |
TCW121B is a new member of Teracom's Ethernet controllers. It is successor of the popular TCW120B. New feature is monitoring and control of relative humidity and temperature. The both relays can be activated independently, not only manual, but also from status of monitored parameters - temperature, humidity, analog voltage and logic level or dry contact connection. Only one parameter can manage the relay at the same time, but for every parameter can be sent e-mail if it goes outside of previously set-up range. More details can be found on TCW121B product page.
|
|
| TST101 digital temperature sensor |
19 Aug 2011 |
|
| |
 In production is a new temperature sensor - TST101. It is based on the Maxim’s high-precision, 1-wire digital thermometer, provides 12-bit Celsius temperature measurements. Each device has a unique 64-Bit serial code stored in an on-board ROM. The sensor has an operating temperature range of -40°C to +85°C and is accurate to ±0.5°C over the range of -10°C to +85°C.
The new digital sensor TST101 provides a low cost option for temperature monitoring. The device is designed for 19" cabinet mounting and can be used for single or multi-sensor systems for environmental monitoring in server rooms. At the moment this sensor is supported by TCW110, TCW111, TCW120 and TCW121 controllers. |
|
|
| TSH201 digital humidity and temperature sensor |
25 July 2011 |
|
| |
 TSH201 is our new combined sensor. It is based on SHTXX, Sensirion’s family of surface mountable relative humidity and temperature sensors. The sensors integrate sensor elements plus signal processing and provide a fully calibrated digital output. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. Used basic element guaranties high precision and excellent long term stability.
TSH201 uses the same components like TSH200 - a microcontroller and special schematic for long 1-Wire support. The device is designed for 19" cabinet mounting and can be used for single or multi-sensor systems for environmental monitoring in server rooms. At the moment this combined sensor is supported by TCW111 controller. More details can be found on TSH201 product page.
|
|
| TCW180B - 8-Relays Ethernet controller |
19 May 2011 |
|
| |
 TCW180B is the newest Ethernet controller in our product line. The device is designed to work in IP-based networks and can be managed by WEB interface or SNMP managers. The controller can be used either stand-alone or like a part of control and monitoring systems. It has 8 relays with NO/NC contacts and 1 digital input, which can work either on logic level or on dry contact changes. Its single digital input can be set up to send alarm messages like e-mails or SNMP traps, on transition low-to-high or vice versa. The device is enclosed in slim plastic box, with a DIN-rail mounting possibility. More details can be found on TCW180B product page.
|
|
| TSH200 digital humidity and temperature sensor |
12 May 2011 |
|
|
 TSH200 is our new combined sensor. It is based on SHTXX, Sensirion’s family of surface mountable relative humidity and temperature sensors. The sensors integrate sensor elements plus signal processing and provide a fully calibrated digital output. A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor. Used basic element guaranties high precision and excellent long term stability.
TSH200 incorporates a microcontroller and special schematic for long 1-Wire support. The device can be used for single or multi-sensor systems for environment monitoring and control. At the moment this combined sensor is supported by TCW111 controller. More details can be found on TSH200 product page.
|
|
| TCW111 is a new member of Teracom's Ethernet Controllers |
20 April 2011 |
|
| |
 TCW111 is a new member of Teracom's Ethernet controlers. It is successor of the popular TCW110. One of the new details is that relative humidity can be measured and monitored. The main new future us that relay can be activated not only manual but also from status of monitored parameters - temperature, humidity, analog voltage and logic level. Only one parameter can manage the relay at the same time, but for every parameter can be sent e-mail if it goes outside of previously set-up range. More details can be found on TCW111 product page.
|
|
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
|
Page 1 of 2 |
